The fixed beam anchor is specifically designed for a fall arrest anchorage. It installs in seconds to the beam structure with final tightening using a built-in adjustment handle. It can be attached to the beam in any orientation or direction. Anchor is easily installed by sliding the adjustable hook-end sown to the flange and securing a pin. Meets or exceeds all applicable industry standards including OSHA, and the stringent ANSI Z359. 5,000 lbs. minimum strength in any direction. Weights vary by product size.
12" Anchor Width
- For Beam Flanges 2-1/2" to 12" wide and up to 1-1/2" thick
- Weight @ 5.2 lbs
18" Anchor Width
- For Beam Flanges 2-1/2" to 18" wide and up to 1-1/2" thick
- Weight @ 5.9 lbs
24" Anchor Width
- For Beam Flanges 2-1/2" to 24" wide and up to 1-1/2" thick
- Weight @ 6.4 lbs
36" Anchor Width
- For Beam Flanges 12" to 36" wide and up to 2-1/2" thick
- Weight @ 9.1 lbs
Weight: | 5.2 lb |
---|